 |
- E-BK FENI 60
|
Stainless Steel Welding Electrode E BK Feni 60
Ferronickel cored electrode for welding grey, nodular and alloyed cast iron. Due to the low heat input, the high tensile strength, and ductility, successful welds can be made on heavy or highly stressed sections. BK Feni 60 can be used for joining virtually all types of cast iron and for joining cast iron to different types of steel alloys. The special formula allows to weld with a high current without the coating turning red. The possibility to use straight polarity without the danger of cracking guarantees full penetration and very strong welds. Thanks to the pulsating arc, BK Feni 60 can be used in all positions (vertical down and up, overhead). Fully machinable, solid, and dense deposit.
Applications
Repairing heavy sections of grey and alloyed cast irons, SG iron, and melanite. Machine bases, motor blocks, gear cases, cast iron dies, pumps. Repairing casting defects with a good color match.Classification
AWS
A5.15 : E NiFe-CI
EN ISO
1071 : E C Ni-Fe 1 1
DIN
-------Typical Weld Metal Analysis %
| C | Mn | Mo | Cu | Ni | Si | P | S | Fe |
| >1% | >1% | 2-2.5% | 1% | 60% | >2% | <0.025% | <0.015% | Bal. |
Mechanical Properties (As Welded)
| Yield Strength RP0,2 (N/mm2) |
Tensile Strength /mm2) |
A (%) |
||
| ? 430 MPa (62 KSi ) |
400 MPa (70 KSi) |
20% |
||
General Information
Welding process
Covered Electrode (SMAW)
Alloy Type
cast iron
Re-drying Temperature
300°C/2hours
Welding Position
All, except vertical down.
.
Cleaning
Remove all cracks and fatigued metal by grinding
Welding parameters
| Diameter & Length (mm) |
Current (A) |
| 2.5x300 |
70~80 |
| 3.2x300 |
90~120 |
| 4.0x350 |
120~150 |